Compression Attached Memory Module

Compression Attached Memory Module (CAMM) is a memory module developed at Dell by engineer Tom Schnell as a replacement for SO-DIMM which has been in use for 25 years.[1]

CAMM was created to overcome technical limitations of traditional DDR memory.[2] The CAMM module allows for shorter traces as compared to SO-DIMM, allowing the memory to be run with less power and at higher speeds. The memory module is pressed and held in place against a bar with land grid array pin contacts which connect to the motherboard. JEDEC Solid State Technology Association (JEDEC) plans to complete CAMM 1.0 specification in 2023.[3][4]

CAMM was first used in the Dell Precision 7000-series laptops in 2022.[5]

Advantages of CAMM include thinner diameter, allows for replaceable LPDDR modules, provide faster speeds above 6400 MHz, more capacities up to 128 GB per module and higher bandwidth. Disadvantages are that it cannot be mounted without tools and uses six screws.

History

In April 2022, Dell launched laptops in the Dell Precision 7000-series that used a custom form factor of CAMM for DDR5 SDRAM.

References
  1. Ung, Gordon (2022-04-28). "Dell defends CAMM, its controversial new laptop memory". PCWorld. Retrieved 2023-04-19.
  2. Solca, Bogdan. "SO-DIMM laptop RAM form-factor to soon be replaced with Dell-developed CAMM standard". Notebookcheck. Retrieved 2023-01-19.
  3. Buzzi, Maththew (2023-04-20). "What Is CAMM? Perhaps, the Future Look of Memory in Laptops". PCMAG. Retrieved 2023-05-15.
  4. Knight, Shawn (2023-01-17). "CAMM standard set to replace SO-DIMM for laptop memory". TechSpot. Retrieved 2023-05-16.
  5. "Dell introduces CAMM DDR5 memory for its new Precision laptops, up to 128GB per module". VideoCardz.com. Retrieved 2023-01-19.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.