X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 13 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 40,912 times.
Learn more...
Do you still have one of those really old A Frame tents but you are afraid to use it because you don't know how to set it up? After reading this how-to you will know exactly how to setup an A Frame tent!
Steps
-
1Gather the things you will need.
-
2Pick a Good Location
- The ideal location to pitch an A Frame tent would be on a flat surface. As well as a flat surface, try to find a spot with a higher elevation than the surrounding area. The purpose of doing this is in case it rains or floods, the water will not all drain down into your tent.
Advertisement -
3Prepare the Area
- Clear away any sticks, stones, pieces of glass or other sharp materials that may cause your tent to rip.
-
4Lay Your Tent Out
- Spread the tent out on the ground where you plan on setting it up.
-
5
-
6
-
7
-
8
-
9Final Check
- Step back and make sure that your tent looks as if it has been setup correctly!
Advertisement
Community Q&A
-
QuestionDo the poles need to go through the metal rings side of tent?Community AnswerYes they do, because if the poles don't go through them, then your tent will fall over!
-
QuestionWhere can I set up an A-Frame tent?Community AnswerYou can set up your tent between two poles or trees as a quick, temporary lean-to. Tie rope between the poles, drape a tarp over it, and fasten it to the ground with pegs or rocks.
Advertisement
Warnings
- Never pitch a tent under a tree as the tree may fall on your tent.⧼thumbs_response⧽
Advertisement
Things You'll Need
- A Frame Tent
- 1 inner
- 1 waterproof flysheet
- some pegs
- some tent poles - will come in pieces
- mallet to hammer in the pegs
About This Article
Advertisement