MK14

The MK14 (Microcomputer Kit 14) was a computer kit sold by Science of Cambridge of the United Kingdom, first introduced in 1977 for £39.95.[1] The price was very low for a complete computer system at the time,[1][4] and Science of Cambridge eventually sold over fifteen thousand kits.[2]

For the firearm called Mk 14, see Mk 14 Enhanced Battle Rifle.
Microcomputer Kit 14
MK14 (foreground) with modern reproductions behind
Also known asMK14
ManufacturerScience of Cambridge
Typecomputer kit
Release date1977 (1977)[1]
Introductory priceGBP 39.95
Units sold15,000[2] (another source states 50,000[3])
CPUNational Semiconductor SC/MP (INS8060)
Memory256 bytes of RAM (expandable to 640 bytes) + 512 bytes of ROM
Display8 or 9 red light-emitting diode (LED) seven segment display
Input20 key keyboard
SuccessorZX80

History
Prototype of the MK14

In 1977, Ian Williamson approached Clive Sinclair and Chris Curry with a computer design based around the National Semiconductor SC/MP processor. Sinclair and Curry both liked the idea and saw the potential of making a low cost microprocessor system available to the hobbyist market. Initially it was planned to market a kit based on the Williamson design. However, after National Semiconductor had been contacted regarding a bulk purchase of the SC/MP processor Sinclair and Curry decided to use the chip manufacturer's own design. This design used all National Semiconductor chips and the company allowed the use of its designs, the SC/MP Introkit and Keyboard Kit, for free. The National Semiconductor SCMPKB Monitor code was included. [2][4]

To keep costs low a membrane keypad was used. The size of the initial batch was two thousand. The company sold between fifteen and fifty thousand in total.[2]

Specification

The computer is based around National Semiconductor's SC/MP CPU (INS8060) and shipped with 256 bytes of random access memory (RAM) and 512 bytes of read only memory (ROM) as standard. It used an eight or nine red light-emitting diode (LED) seven segment display, there was also optional VDU supporting 32×16 text or 64×64 graphics. Input and output was a 20-key keyboard and reset switch. Cassette-based and PROM storage were optional extras; a sound card was not included but a design for one was provided.

The on-board RAM could be increased in two ways; by the addition of an INS8154N RAM/IO chip providing an additional 128 bytes of RAM along with 16 I/O lines, and also a further 256 bytes by adding two 256 × 4 bit RAM chips giving a maximum of 640 bytes on board. These memory spaces were not contiguous in the memory map. It was possible to connect off-board RAM giving a 2170 bytes total.

The MK14 could address up to 64 KB of memory space by adding a few chips (the NADS address strobe indicated when the most significant four bits of address were available to be captured by an external latch); many pioneering homebrew computer magazines such as Personal Computer World, and Practical Electronics carried details of user modifications.

See also

Notes
  1. "Planet Sinclair: Computers: MK 14: Articles: PE 5/79". www.nvg.ntnu.no.
  2. "Ian Williamson: The engineer who gave Sinclair his first micro". The Register.
  3. Sinclair, Planet. "Planet Sinclair: Computers: MK 14". rk.nvg.ntnu.no.
  4. Computerphile (15 November 2017). "1978's Raspberry Pi (MK14) - Computerphile". Archived from the original on 2021-12-22 – via YouTube.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.